Lee Cutter & Lock Stud/case trimmer (large) for 50 BMG 90401

Lee Cutter & Lock Stud Large case trimmer.

Motorize your case preparation. Fits any electrick drill. Trim, chamfer & polish your cases electrically or by hand

 

After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. There is no better system to check and trim cases than with the Lee case length gauge and cutter. You don't need an expensive caliper to set length and never waste even a single case setting up with the cut and try system common to all other fixed length design assures it will never go out of adjustment.

Quickly trim cases with the Lee Case Trimmer. The Cutter and Lock Stud works for all calibers. A Case Length Gauge and Shell Holder must be ordered for each caliber. Trims cases by hand or use with an electric drill to trim, chamfer and polish cases faster. Squares the mouth for more accurate bullet seating and exit. Includes Cutter and Lock Stud only. Large Cutter & Lock Stud is designed for .475 and larger cases but can be used on any case.

This is used in conjuction with the "Lee cutter and lock stud" to trim case to the correct length, this can be purchased instore.