Lee Micrometer 45-70 Government Dies 90561

Lee Reloading dies 45-70 Goverment #90561

Comes with:
Full length sizing die
Powder through expanding die

Micrometer bullet seating die

Shell holder
Powder measure

Micrometer Bullet Seating Die:

The new micrometer bullet seating die works so well. The case mouth and bullet are held in perfect alignment by a floating bullet guide. The bullet guide with radial clearance, allows the case and bullet guide to align perfectly with the bullet seater screw. Bullet seating screw is machined and burnished to seat nearly any point style bullet without damage or marking. Tests prove sliding bullet guide provides cartridges with the least bullet runout.

New bullet seating die features dead length bullet seating with smooth, accurate adjustment. When used as a dead length bullet seating die, the body contacts the shell holder assuring precise uniform seating depth. The floating bullet guide is reversible, simply unthread guide and re-install to allow seating and crimping simultaneously, an exclusive feature to Lee.

Laser engraved micrometer thimble and body is easy to read with divisions representing one thousandth of an inch, reads just like a precision depth micrometer. Infinitely adjustable, providing precision bullet seating depth.

This bullet seating die proves accuracy doesn't have to cost a lot.

Full Length Sizing dies are machined to the tightest tolerance in the industry. Sizing to SAAMI maximum, providing longer case life. Most competitor's size to SAAMI minimum, the problem is this results in unnecessarily over-worked brass, limiting case life. Our sizing die has a built-in stuck case remover, nothing additional to purchase. If you stick a case, using simply handtools you can free it. 

 **These dies are threaded 7/8" x 14, this is the industry standard for reloading dies and presses, so will fit all modern Lee, Hornady, RCBS, Lyman ect, presses***