Rebarrel by Gunworks
Rebarrelling prices start $1450 including GST which includes the barrel, fitting, chambering, oxiblast and engraving.
.jpg)
We can rebarrel most firearms that have their barrel "threaded into the receiver" (can't do browning as per below), any barrels that are not threaded eg barrels that are pressed in cannot be rebarreled by us.
We also don't rebarrel lever actions as the receivers are very fragile and can be easily damaged.
** Browning X-Bolt & A-Bolt - can't rebarrel **
** BSA's that require extractor slots milled (includes mauser actions) **
Unfortunately we can’t rebarrel or do anything that requires the barrel to come out of the action on both the Browning x-bolt and a-bolt because when we try to take the barrel out of the action, the removal process can gaul the thread on the action and original barrel as the action has not been lubed from factory.
Hint - when buying virgin brass, gently fit the brass case into your chamber (if you push the case in too hard it may get stuck if it doesn't fit). If the bolt won't close, run the brass through your full length sizing die and check the length of the case as sometimes virgin brass can be a smidge too long.
Reamer List
| 22 LR | 6.5 stw |
| 22 Mag | 6.8 SPC |
| .17 rem | 270 win |
| 17m2 | 7mm-08 |
| 17mmr | 7mm rem mag |
| .17 ackley hornet | 7mm stw |
| .17 hornady hornet | 7mm wsm |
| 22 Benz | 7x57 mauser |
| 204 ruger | 280 ackley improved |
| .20 practical | 280 rem |
| 22 hornet | 284 win (318 neck) |
| 22 K hornet | 7.62x39 russian |
| 222 rem | 300 blackout .340" |
| 223 rem | 308 win |
| 223 Rem no throat | 30-06 springfield |
| 223 wssm | 303 british |
| 220 swift | 300 win mag |
| 22-243 win | 300 weatherby mag |
| 22-250 | 300 wsm |
| 22-250 AI | 30 m1 carbine |
| 243 win | 30-221 |
| 243 wssm | 338 lapua mag |
| 260 rem | 338 federal |
| 6mm rem | 357 Mag |
| 6mm Rem AI | 375 h & h |
| 6mm Creedmoor | 416 rigby |
| 6mm/244 ackley improved | 416 barrett |
| 6mm-45 | 444 marlin |
| 257 roberts | 44-40 wcf |
| 25-06 rem | 45-70 govt |
| 6.5 Creedmoor | 45 acp |
| 6.5x39 russian | |
| 6.5x47 lapua | 50 bmg |
| 6.5-06 springfield | 577 snider |
| 6.5-284 win | 762 nato |
| 6.5 PRC | 7.62 x 54R |
| 6.5x55 swedish | 9mm luger |
| 264 win mag | 410 3” |
| 6.5/300 h & h | 12g |
| 6.5/300 wsm |
We cannot ream hammer forged barrels such as tikka and sako as the reamer may leave rings in the chamber that we can’t cut out.
