Gunworks Canterbury

For sale  – one only LEFT HANDED  $1800

Tikka T3 LH 7mm-08 with EBS suppressor – SECOND HAND

Had no more than 50 shots through rifle.

EBS information

The EBS suppressor uses an aluminium body with stainless steel internal muzzlebrake and stainless steel internal baffels for long life.

Barrel is turned down to reduce the weight so on a Tikka T3 there is a very small change in the overall weight of the rifle from its original configuration

We use a full 30mm dia suppressor tube for your safety and to increase the internal volume in the suppressor.

Using innovative techniques we are able to bring the forearm out so minimum material is removed from the wall of the stock keeping the forend fully rigid. Which is extremely desirable for accuracy and MPI retention.

This suppressor can be removed for cleaning and a small coating of a special lubricant which we provide with the suppressor is used to coat the barrel to prevent the firing residue hardening and sticking on the barrel. We don’t recommend automotive grease for the obvious reason!

Users may elect to simply leave the suppressor on and let it fill with carbon in which case the suppressor will outlast the life of the barrel in this calibre.

Seldom available off the shelf, this is an ideal opportunity to get the original alloy enclosed barrel suppressor from NZ’s original leading manufacturer.

Benefit from Gunworks’s vast suppressor experience!!!!

Only while stocks last $450 incl GST 12ga Pump Action Shotgun

Check out our Ammo Guns Projectiles Brass etc Page

The T3 Lite Suppressor Package

Features include:

Tikka T3 lite stainless (usual NZ retail price $1399) – available in:

.223 1:8″ twist, 6.5×55, .243, 7mm-08 or .308 other calibres may be available, please feel free to enquire

Standard Suppressor with delrin bush $460

Return freight $15

You choose the barrel length and we will fit the suppressor to your specifications

Total $1874 Todays special – this package for $1639 save $235.00

The Tikka T3 Liter “works” package

This is a fully pimped out Tikka T3 ready to go.

Features include:

Tikka T3 Liter stainless (usual NZ retail price $1399) – available in:

.223 1:8″ twist, 6.5×55, .243, 7mm-08 or .308 other calibres may be available, please feel free to enquire

Barrel Fluting – 7 groove square style (normal RRP $300.00)

Halfcock, includes upgrade mainspring and firing pin shaft polish and trigger job (normal RRP $115)

Bolt Fluting (normal RRP $138)

Sling swivel stud relocated to tip of forend if required (normal RRP $34.50)

Factory tikka ring screws replaced with high strength type (normal RRP $13)

Return freight $15

Total $2014.50 Todays special – this package for $1800 save $214.50

“Hey Bob, I hear them Gunworks Suppressors are real quie…”

40gn Hornady V-max at 4100fps from a Kimber 20 Tac meets pigeon…….spectacular!!!